News  \ 

MTQ Thread Mills

27.04.2009
 
 
 
Solid - Carbide threads mills with internal coolant bore that includes specific cutting  length and relieved neck.

Usages 
  • To perform medium and large threads on relatively deep work pieces.
  • Reduce cycle time by using higher cutting speeds and feeds. 
  • To use over hang according to the application.
  • To perform deep threads at the bottom of the application
     
    Carbide Grade : MT7
    Sub-Micron grade with Titanium Aluminium Nitride multi-layer coating
    (ISO K10-K20). To be run at medium to high cutting speeds. General purpose for all materials.
 
Advantages 
  • Provides high rigidity and stability (anti-vibrations) 
  • To accomplish deep threads in one pass. 
  • Relatively low cutting forces due to short cutting length which enables reduction of the radial in feed required.
  • Internal coolant for effective chip removal.
  • Spiral flutes allow smooth cutting action and shorter machining time.
  • Threads length up to 3D
Back